Demo Night – Greene & Greene Style Finger Joints

Video - July 24, 2008

This is an excerpt from the live Demo Night that took place 7/23/08. The topic was creating Greene & Greene style joint for the Gadget Station project. Its a long video, but lots of details were covered and numerous questions were thrown out by the chat room. This was our best turnout yet with 180+ viewers! This isn’t exactly as fun as the live experience but its a close second for those who couldn’t make it. Enjoy!

17 comments on “Demo Night – Greene & Greene Style Finger Joints”

George Barry July 25, 2008 9:17 am

Nice demo, thanks. It just shows that there are multiple ways to achieve a goal…just use whatever is comfortable to you.

Reply
Chris Cloutier July 25, 2008 10:24 am

First time watching one of the demos, live. Good info, and fun to watch, the video stream was near perfect. Keep up the good work!!!

Reply
WiZeR July 25, 2008 2:15 pm

Marc, thanks very much for taking the time to edit and publish this. I’m glad I didn’t miss out! Good demo, I love that joint.

Reply
Chuck July 25, 2008 3:41 pm

Great Demo. but the live version was a lot more fun, makes the show well worth it. I hope you double attendance next week.

Reply
Joe R July 26, 2008 12:14 am

I didn’t get to view the live demo (time zone difference), but the edited, yet still long excerpt was great. Nice joint, good tips.

Reply
Greg July 26, 2008 6:37 am

Since the time difference for me means that I would not be able to participate in the live event, I really appreciate the edited version. I found this well worthwhile and look forward to many more to come.

Thank you

Reply
James in Tempe July 26, 2008 11:25 am

Marc,

I noticed you using your Japanese style chisels in the video.

What brand do you like?

I may be going to Japan for my friend’s wedding in November.
Would it be worthwhile to pick up some tools while I am there?
Or is it just easier to use the web and avoid the TSA issues?

What would you recommend?

Whatever it might be I should probably start saving up for it now.

Thanks!

Reply
thewoodwhisperer July 26, 2008 12:45 pm

Hey James. The brand I use is Fujihiro. You can check them out here: http://www.hidatool.com/shop/shop.html

Not sure how much money you would save by getting them overseas, but at those prices, its certainly worth looking into. I imagine if you just put the chisels in your checked luggage you would be fine as far as TSA is concerned.

If you happen to have any local friends there, I am sure that would make the job of locating a reputable dealer a whole lot easier. Does Rockler have a Japanese store? lol.

Good luck.

Reply
Rick July 26, 2008 5:35 pm

Thanks for doing the demo with live chat I had a blast.

Reply
Mike July 28, 2008 6:17 pm

I guess my comments didn’t make it some how, anyway thanks for the demo it gave me some more ideas
Mike

Reply
Wilbur Pan August 3, 2008 2:09 am

Hi Marc,

Just curious, why not set up a stop block on the miter fence to line up your cuts instead of relying on the rip fence? Especially since those Incra miter gauges have that ability built in.

Reply
thewoodwhisperer August 3, 2008 9:27 am

No real reason. Just didn’t think of it. lol

Reply
David Persson April 22, 2009 2:51 pm

Hi Marc,

I think the screws are placed a bit too far out in the ends of the wood.Isnt there a risk of a crack when tightening them up later on?

Reply
- thewoodwhisperer April 22, 2009 4:04 pm
  
  Honestly, the screws were just there for reinforcement. In the future, I probably wouldn’t use screws at all. Kind of overkill. If I want to add reinforcement next time I might just glue in a dowel. So if you really cranked down on the screws, I imagine you could certainly crack it. But I installed mine rather gently and didn’t really torque them that much.
  
  Reply
Jay February 29, 2012 5:50 pm

Mark,

I like the term undulating and use it wherever possible. Just kidding about using wherever possible, but I would say with this style the word comes to mind. :)

Jay

Reply
Jay February 29, 2012 5:51 pm

And…I meant MarC with a C…sorry.

Reply
Brandon December 30, 2012 2:37 am

Interesting joint, never seen it before.

Reply

TWW Store

TWW Guild

Wood Talk

Forum

Resin Cast Memory Frames – WFC2017

137 – River Bend Windsor Chair Kit

191 – Pasta Power

34 – Sculpted End Table (1 of 6)

119 – Featherboards & Push Sticks

175 – Turning a Tool Handle

Demo Night – Greene & Greene Style Finger Joints

12 – A Guide to Woodworking Clamps

58 – Gadget Station (2 of 12)

Moving Into the Colorado Shop

200 – Installing a Clear Vue CV1800 Cyclone

Double Your Drawer Storage

Outdoor Sitting Bench

Sponsors

Advertisers