Jewelry Box

Video - January 22, 2018

This video is sponsored by Powermatic and Titebond.

I hope you enjoy this FREE version of the Jewelry Box Guild project. If you want to build this project, you can get immediate access to the digital plans and over four hours of video instruction. Click here to learn more!

This Jewelry Box is designed to pack a lot of storage into a small space. It features five drawers, an upper storage compartment, side compartments, and a hidden drawer. The wood I used is highly figured Walnut and Honduran Mahogany.

Products Used

3/8″ 9 degree Dovetail Bit
Razor Saw
Ron Bontz Half-Blind Dovetail Tool
1 1/2″ Diameter Core Box Bit
trusty self-centering bit.
Brusso CB-301
Brusso JB-101
Eagle America 102-0802
Freud 7-Piece Forstner Bit Set
3/8″ rare earth magnet
1/4″ rare earth magnets
Osmo Top Oil
Suede
Adhesive – Due to limited inventory on Amazon, this link goes to the red adhesive. Be sure to look around and find the proper color to match your suede.
Flocker

Gallery

9 comments on “Jewelry Box”

Peter Durand January 22, 2018 11:41 am

Although I don’t need a jewelry box, I will be buying this plan for the many techniques and tips that I can use on another project I am planning.

Many thanks again.

Cheers,
Peter

Reply
Patrick Schupbach January 23, 2018 7:20 am

First class work …
That Walnut is amazing !!!

Reply
T wagner March 6, 2018 12:41 pm

A real man doesn’t wear an apron.

Reply
- Marc Spagnuolo March 7, 2018 10:39 am
  
  “real men” don’t evaluate the appearance of other men. But if that’s your thing, who am I to judge? :)
  
  Reply
Chris McEntee April 29, 2018 7:42 pm

I’ve never seen that spray on felt material before. I’ve wondered had to add felt without using actual sheets of it making it look cheap or sloppy. Great video and great looking piece.

Reply
John Fitz November 16, 2018 4:35 pm

I wish I could “like” one of your replies above. :)

Excellent preview!! I have to admit this project wasn’t really top of my ‘list’ in terms of projects I wanted to get (simply because I’m not really a “jewelry box” type of person), but after seeing the details and techniques in this video, it’s moved up more than a few notches. I can’t help but think of making it and giving it to a very special young lady in my life as well.

Reply
Ray Gipson December 17, 2018 5:21 pm

Thank you Marc! Your work is always inspiring.
Could I purchase just the cut list for this project at a reduced cost? I’m experienced in these techniques and really want to make this box. If not, I understand.

Reply
- Marc Spagnuolo December 18, 2018 5:23 pm
  
  Sorry Ray. We don’t really have anything in place for selling the “plans” apart from the video series.
  
  Reply
Bryan Fazenbaker February 2, 2019 10:47 am

I have just purchased a quilted maple billet, 5A figure. This looks like a wonderful fit. I should have enough walnut as a substitute for the mahogany. Your designs and details are impressive, to say the least. In fact, I have to make two of these…both daughters have graduations coming (high school and med school). I’m gonna have my hands full. I may need to go the full plans route…or they’ll never receive their gifts. :

Reply

TWW Store

TWW Guild

Wood Talk

Forum

56 – Tablesaw Setup (2 of 2)

136 – Trestle Table (3 of 3)

219 – Safety Gear Upgrades

Tool Wall, Garage Door Cover, New Fans, DC Upgrades – Shop Update 6/17

18 – Torsion Box Assembly Table Top

166 – How to Install a Drawer Knob

Jewelry Box

Recommended

Products Used

Gallery

273 – Barrister’s Bookcase

71 – Folding Magazine Rack

143 – Scraper Sharpening w/ William Ng

99 – Low Entertainment Center (3 of 5)

187 – The Knife Block

Bluetooth Earbud Shootout

Sponsors

Advertisers