The Wood Whisperer » arts & crafts

11 – Arts & Crafts Table (Pt. 4)

thewoodwhisperer — Thu, 08 Mar 2007 16:00:26 +0000

In the final part of this episode, I show you how to make a curved template for the bottom rails. I also discuss joinery, finishing, and glue ups. I also show you what I find to be the easiest way to attach a solid table top to a base. This episode moves fast so hang on to your hats!

11 – Arts & Crafts Table (Pt. 3)

thewoodwhisperer — Thu, 01 Mar 2007 14:46:56 +0000

Tabletop glueup and smoothing. Milling aprons and discussing joinery options. A demonstration of the Festool Domino.

11 – Arts & Crafts Table (Pt. 2)

thewoodwhisperer — Wed, 21 Feb 2007 20:53:02 +0000

In this episode, I select and prepare the stock for the table legs and table top. I also review strategies for cutting thick stock, stabilizing large knots, and milling extra long boards.

11 – Arts & Crafts Table (Pt. 1)

thewoodwhisperer — Thu, 15 Feb 2007 03:53:43 +0000

For the very first time on The Wood Whisperer, we are going to build a full piece of furniture. I had a commission recently for a beautiful Arts & Crafts table made of alder. Only problem was, I needed to get it done quickly. And unfortunately, trying to film a podcast at the same time would prove detrimental to my promised time-frame. But since I felt this was a great project for you to see, I filmed as much as a I could and as fast as I could. So if things look a bit rushed or not as polished as usual, cut me a little slack.

Here’s the final cut list: Table Top: 36″W x 72″L (4) Legs: 29 1/4″L x 3″W x 3″T (2) Long Aprons: 64″L x 3 1/2″W x 3/4″T (4) Short Aprons: 28″L x 3 1/2″W x 3/4″T (8) Side Slats: 16 1/4″L x 3″W x 1/2″ T

Note: I will be using the Festool Domino to construct this entire project. If you plan on cutting traditional integral tenons for this project, please include 3″ extra length on all apron pieces for 1 1/2″ tenons, and 2″ extra length on all side slats for 1″ tenons.

In part 1 of this episode, I show you the process that I go through whenever I begin a new project. This involves some educated guesses and the use of SketchUp, a free program that allows you to easily draw 3D renderings.