THE WOOD WHISPERER IS PROUDLY SPONSORED BY:
7;t think you can go wrong with any of the above finishes. Good luck! And here is Mathew’s finished project: I finished the project a couple of weeks ago for my cousin’s wedding gift. It is a chest made of maple and cherry. When it came down to the finish, I used a mix of 50/50 bullse...
In an effort to relieve our backlog of viewer submissions, this is a grouping of several projects from multiple woodworkers. We will do a few of these over the next few weeks so there will be plenty of eye candy! Cypress Planter by Dennis This is a cypress planter I made for my mom. The panel a...
This Viewer Project come from Ken in Ottawa. Let’s check it out: I am sending you some photos of one of my latest projects for the project of the week. It is inspired by your End Table project but with a twist. First a little background. The wood working club I belong to. The Ottawa Woodw...
Spring is here and before you know it, we’ll be fighting the heat of Summer. So now is the perfect time to get inspired and start thinking about projects you can make to enhance your enjoyment of the great outdoors! All week long we’ll be posting Viewer Projects with an outdoor theme, ...
This Viewer Project comes to us from Russ. He writes: I wanted to submit something for your Viewer Project portion of the blog. It’s a trunk that I made for a former player of mine that is getting married on Friday. She’s a great kid and did absolutely everything I asked of her the t...
n three coats of lacquer on the inside and I will be using the same sanding sealer and five coats for the outside. My goal is to finish up gluing this week, I can only glue after work and I only have enough small clamps to glue four clocks at a time. My goal is to finish all the gluing by Friday nig...
This mind boggling project comes to us from Neil. Its an incredible lesson in “outside the box” thinking! Let’s hear from Neil: I’m a South African living in Britain watching your American show – interesting how the world works huh? I’d like to enter a Viewer ...
Again?!?! Every time Woodworker’s Safety Week rolls around, I can count on at least a few folks saying, “Haven’t we covered everything already?!” Yeah, I’m talking about you Shannon. Ha! Honestly though, it is a valid question. After all, how many times can we talk abo...
e when you run your hand over it. No gaps or anything. Let me know if you have any questions about the project. I finished both of them in about three weeks worth of afternoons. I had work till 3pm Mon-Fri so I only had a few hours each day. I Finished up just in time for X-mas. ...
ers + doors as well. The cabinet is finished with shellac (3 coats) via my Apollo HVLP spray unit, and rubbed out to a satin sheen with Howard’s feed n wax. And yes, I did use casters – double locking ones – they put a strong brake on the wheel plus a lock on the swivel. They actua...
This Viewer Project comes from Stan. Its a curvy design with some incredible figure! Here is the latest project that I finished. It is a coffee table for a corner sectional couch. The table was the result of watching David Marks’ video on curvilinear methods. The design for the table ca...
This Viewer Project was sent in by Jim. He writes: This is my most ambitious furniture project to date and one I am verrry happy to be finished with. Needless to say, my wife is happy also. She wanted two new end tables to replace the nice, but 30 year old ones we had in our living room. I began...