THE WOOD WHISPERER IS PROUDLY SPONSORED BY:
... recess that will be used for either adjustable shelving or clamp storage. The sides of the base will also be used for hanging things like hammers and small clamps. So its not 100% complete yet, but you get the idea. A few extra details for you. The height was strategically made to be the same as my...
Construction of a dead flat torsion box assembly table, similar to the one made by David Marks on Woodworks....
... box spacers alternate for easy brad gun use; assembly of base is entirely with confirmat screws and no glue allowing disassembly if ever desired. The table is 36 x 72 inches with 32 inch height. ...
Right Click to Download Right Click to Download in HD Subscription Options This video was recording like on 9/14/11. My goal was to discuss my new torsion box assembly table and what makes it different from the original Torsion Box Assembly Table. To be perfectly frank, the differences werenR...
tures of a work bench with the features of an assembly table. It was this idea that actually ended up saving space despite the fact this new bench is larger than the two it replaced combined. It measures approximately 81″ x 51″ x 36.5″. The base is walnut, the panels are birch pl...
...t. The top is flat and stable, never needs to be flattened. This design is extremely rigid, no chance of racking. The leg-vise chop is also a torsion box, lending the same benefits. 8/4 lumber is expensive and all solid lumber warps over time, not a torsion box. I made the chop from scrap 1/2̸...
, I decided to give building one a crack myself. The box is primarily made from 1″ MDF and a hardboard layer on the top skin. I also put quite large dog holes to accommodate clamps so it would serve as a multi-function table also. I finished the edges with 1/2″ plywood which made it l...
This video covers the construction of our assembly table base. This unit has tons of storage thanks to the dual-sided design. Details covered include: cutting the sheetgoods, milling the rabbet and dado joinery, installing European cup hinges, and installing full extension drawer slides. And be sur...
I figured I’d share this since it’s mostly based on what I’ve learned from watching your videos. I have posted this on another woodworking forum only to have people ask me for better pictures / plans, etc. For those looking for an outfeed table, lots of drawers to hold stuff, and ...
ve me an opportunity to try my hand at making rail and stile panels. All of the spalted hack-berry panels were cut just using simple bevel cuts on the table saw to make the raised panels. It was important to me to hide the lock, so I routed a short slot in the center of the plywood bottom panel and ...
have to build a new one when you get your new shop. Its 4 feet by 4 feet and adjusts from 30 to 39 inches in height. I don’t have the room for a larger one. It is on Zambus 2600 lb casters so it rolls real nice and locks down beautifully, my 2 year old can move it. Its made of mostly maple som...
...le things that don’t really have a place as a full Wood Whisperer episode. I hope you enjoy them. This mini covers the process of sawing off a box top. This particular box is part of the Sawmill Creek Forum’s Keepsake Box Collaboration. Germain told me about it, and Jim and Dewey invit...