THE WOOD WHISPERER IS PROUDLY SPONSORED BY:
onclusions that I felt I needed to share. Thanks for playing along everyone and enjoy! Oh and one more thing, nothing will prepare you for the first 25 seconds! End Table (Pt. 1) End Table (Pt. 2) End Table (Pt. 3) End Table (Pt. 4) End Table (Pt. 5) End Table (Pt. 6) ...
ver finessing the dovetail’s fit and some special techniques for creating a stopped sliding dovetails. Enjoy! End Table (Pt. 1) End Table (Pt. 2) End Table (Pt. 3) End Table (Pt. 4) End Table (Pt. 5) End Table (Pt. 6) ...
month for another video. So instead, I will be releasing videos as I go. Should be a nice change of pace. Links: End Table (Pt. 1) End Table (Pt. 2) End Table (Pt. 3) End Table (Pt. 4) End Table (Pt. 5) End Table (Pt. 6) ...
...e steel dowels that will suspend the tabletop in the middle of the piece (you’ll understand when you see it). End Table (Pt. 1) End Table (Pt. 2) End Table (Pt. 3) End Table (Pt. 4) End Table (Pt. 5) End Table (Pt. 6) ...
ussing the dangers involved with this routing operation. And finally, an nice treat for everyone: a Nicole Break! End Table (Pt. 1) End Table (Pt. 2) End Table (Pt. 3) End Table (Pt. 4) End Table (Pt. 5) End Table (Pt. 6) ...
... a top to the table. What would you do? And here is the link for the rasp I used in the show. It’s the 10” Pattern Maker Cabinet Rasp, 2nd Cut, #49. End Table (Pt. 1) End Table (Pt. 2) End Table (Pt. 3) End Table (Pt. 4) End Table (Pt. 5) End Table (Pt. 6) ...
...are just a little lazy and you don’t want to do the extra sanding. Well there is still hope. Simply pre-seal the end grain. A light coat of a 2lb cut of shellac will work great for this. You can also use a solution of glue size. Glue size is basically a solution of PVA glue and water (dil...
and my shop is tiny. So I was looking for a small, portable table that I could set up outside the shop with a minimum of effort. I decided on a table 21″ x 16 1/2″. It needed to be 14″ tall to allow me to drop the motor out the bottom for bit changes. Since I wasn’t mounting...
ect but with a twist. First a little background. The wood working club I belong to. The Ottawa Woodworking Association (OWA) last year had our first 2X4 competition. The basic idea is to take one standard construction grade pine 2X4X8รข ...
...eriously, unless you want to blow a gasket or wind up with a hernia. Trimming to Length Once the thickness was established, I needed to trim the rough ends of the slabs. Seems simple enough, but at 4″ thick, this operation required a little extra planning. The Benchcrafted plan mentions that t...
...w much the table top shrunk. At this point, I can only estimate the relative humidity at that time, so let’s say it was about 70% in Anaheim and 20% in Phoenix. For some help estimating relative humidity, check out this handy chart. And according to the calculator, I should have expected the t...
... Marc’s compassion and support and wanted to be able to create something from my own hands to proudly pass down to my own children. I chose this table design because I very much like mission style furniture, or so I thought at the time! It had enough challenges for a beginner to learn from, bu...