THE WOOD WHISPERER IS PROUDLY SPONSORED BY:
nd as fast as I could. So if things look a bit rushed or not as polished as usual, cut me a little slack. Here’s the final cut list: Table Top: 36̸3;W x 72̸3;L (4) Legs: 29 1/4̸3;L x 3̸3;W x 3̸3;T (2) Long Aprons: 64̸3;L x 3 1/2̸3;W x 3/4̸3;T (4) Short Aprons: ...
In the final part of this episode, I show you how to make a curved template for the bottom rails. I also discuss joinery, finishing, and glue ups. I also show you what I find to be the easiest way to attach a solid table top to a base. This episode moves fast so hang on to your hats! ...
In this episode, I select and prepare the stock for the table legs and table top. I also review strategies for cutting thick stock, stabilizing large knots, and milling extra long boards. ...
Tabletop glueup and smoothing. Milling aprons and discussing joinery options. A demonstration of the Festool Domino. ...
throughout. If so, then they will also be square when screwed to the fence. Since I planned to carry this table around a lot, I eased all edges with a 3/8̸3; roundover bit to make it easy on the hands. I installed the switch to allow turning the router off and on without reaching under the table...
ong everyone and enjoy! Oh and one more thing, nothing will prepare you for the first 25 seconds! End Table (Pt. 1) End Table (Pt. 2) End Table (Pt. 3) End Table (Pt. 4) End Table (Pt. 5) End Table (Pt. 6) ...
...the changes and my reasons for them. The Cabinets The cabinet carcasses were milled up by my buddy Ron on his CNC machine. I basically brought all the parts home and did the assembly, but there was still quite a bit of work to do, including drawer construction and edge-banding EVERYTHING. I used map...
ekend frame class. With 13 people of varying skill levels, it was a little crazy at times. But the sawdust was flying and spirits were high. So the party got started with template tracing, bandsaw cutting, and flush trimming at the router table. With that many people, its inevitable that youR...
alnut inlays and then dyed reddish brown, and then spray lacquered. The legs and frame are also solid soft maple with walnut inlays that protrude out 3/8 of an inch on each outside leg. There is one walnut large bow-tie in the center and a smaller one in each corner. ...
... I recently came across. Solid Top + Frame = No Joy The first comes in the form of a call for help from Tasha. Her email described a beautiful dining table that continues to crack on her. The project was initially completed in a cold/damp garage and was brought into her home which was heated by woo...
...ded with a brilliant answer which I followed some of, and sorta “adapted” the rest. Here is my finished Asian “inspired” hall table. Its mostly wenge, (the top is from an 8/4 slab that I resawed (took nearly a bloody hour on a 14̸3; Delta with a riser block…) The ...
nique as yours, just with a few changes. It seemed absolutely useless to have a full table in the shop that I couldn’t roll under. So I made a 36̸3; opening in the middle of the table for me to roll into. When I did this, it allowed for two smaller shelves on either side instead of the ...